Filter
Top Products
14. Push this button once to pause playing the
DVD in the Polk DP-1 CD/DVD/MP3 player. Press
it a second time to totally stop the DVD. With a CD in the player,
this button simply stops the CD. When the MULTI source/device
button gets pressed, enabling multi-zone remote speaker use with
the DS System, this button acts as the down arrow navigation for
the on screen display (OSD) for the Digital Solution
preamp/processor.
15. This button acts as the Clear command for the
DP-1 CD/DVD player. This button has no function with
the Digital Solution preamp/processor.
16. This button opens and closes the disc drawer of
the Polk DP-1 CD/DVD player; it has no function with
the Digital Solution preamp/processor.
17. Numeric Keypad – Use the number buttons to directly access a
track or chapter of a disc. For example if you want to go directly
to track 8 of a CD, press 8 on the keypad. To get to tracks higher
than 9, use a two key combination. For example if you want to
listen to track 10, press 1 followed by the 0. To hear track 12,
press 1 followed by the 2. You have about two seconds between
key presses before the DR-3 accepts the digit. Press two-key
combos in quick succession, or the DR-3 will only recognize the
first number keyed. These buttons have no function with the Digi-
tal Solution preamp/processor.
18. These buttons raise and lower the volume of
the Digital Solution subwoofer just like the
SUBWOOFER +/- buttons on the Digital
Solution system remote.
19. When the remote is set to operate only the DS
preamp/processor (push the AM/FM button to do
this) these buttons manually tune the radio up (+)
or down (-) the radio dial just like the -RADIO TUNER+
rocker button on the Digital Solution system remote.
When the DR-3 remote is set to control the DP-1 player, the
Tune+/SETUP button acts to bring up the DP-1’s hardware Set Up
menu on your TV screen. The TUNE-/SUB TTL button allows you
to turn DVD subtitles on or off and switch between languages.
This feature may not work with all DVDs, particularly those with
no subtitles.
20. This button selects a choice on a menu such as the
set-up menu of the DP-1 or the chapter menu of
a DVD disc; it has no function with the Digital Solution
preamp/processor.
21. This button toggles through the available audio
tracks on a DVD. For example, if a DVD disc has
a 2 Channel audio track, a Dolby Digital 5.1 and a DTS 5.1 track,
each time you push this button, the next available audio track
will play. This eliminates the hassle of going back to the DVD’s
main menu to change the audio type. This feature may not work
with all DVDs (pity). This button has no function with the Digital
Solution preamp/processor.
22. These buttons allow you to move the
DVD cursor among set up menus to
select operations. For example if you
are looking at a DVD’s main title menu
and you want to move to the Scene
Selection menu, push the appropriate arrow button to move
the DVD cursor to the Scene Selection graphic on the TV
screen. This button has no function with the Digital Solution
preamp/processor.
23. Use these buttons to make the DVD
play at a slower than normal speed
either forward or backward. Press
the button once and the play speed
will be 1/16 normal speed. Press it
a second time and the DVD will play at 1/8 speed and so on down
to 1/2 speed. Press the PLAY/ENTER button to return to normal
playing speed and direction. This function does not work with
CD playback, only DVD. NOTE: the sound is muted during Slow
play operation.
24. Some DVDs offer multiple camera angles. With
such a disc, pressing this button toggles between the
available camera angle views. In most cases (particularly
movies) there is only one camera angle view on the disc and all
that happens when you press this button is the symbol will
appear on your TV screen.
25. The Zoom function allows you to enlarge the video
image and to move through the enlarged image. Press
ZOOM during normal playback or the Pause/Still mode to engage
the Zoom function. Each time you press the ZOOM button, the
magnification increases. There are a total of six magnification
steps. To return to a normal picture keep pressing the ZOOM but-
ton until the picture goes back to
normal or press the button.
If you want to move around the magnified image to focus in
on a particular detail, use the keys.
NOTE: The zoom feature does not work on subtitles and menu
screens.
26. These four buttons allow
you to program in the codes
for other remotes or “teach” the remote specific commands. See
the separate DR-3 remote manual for instructions on using these
buttons.
27. This button acts as the on/off button for the
other components in your system once you have entered their
remote codes into the DR-3. See the separate DR-3 remote man-
ual for instructions to learn how to program the DR-3 to operate
other devices.
28. This button turns on and off the Digital
Solution system only. This function does not change when
you enter program codes for other devices
9
Polk Customer Service (800) 377-7655