Filter
Top Products
22
Preparation
When
BEMý87JJ
BEMý87JJBEMý87JJ
BEMý87JJ
appears or the remote stops operating
properly, replace the batteries.
Warning:
Dispose of old batteries promptly and proper-
ly. Do not burn or bury them.
Caution:
If you do not plan to use the remote for a
month or longer, remove the batteries. Batteries can
leak chemicals that can destroy electronic parts.
SETTING THE CLOCK
Note:
You must reset the clock each time you replace
the batteries.
1. Hold down
P
for at least 3 seconds.
9E:;ý I;J
9E:;ý I;J9E:;ý I;J
9E:;ý I;J
appears.
Note:
To exit setup at any time, hold down
P
again
for at least 3 seconds.
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
appears, followed by
the last-used mode screen.
2. Touch the down arrow six times until
9BE9Aý I;J
9BE9Aý I;J9BE9Aý I;J
9BE9Aý I;J
appears.
Note:
If you scroll past
9BE9AýI;J
9BE9AýI;J9BE9Aý I;J
9BE9AýI;J
, touch the up arrow
to scroll to it.
3. Touch
SELECT
. The day and time appear and the
day flashes.
4. Repeatedly touch the up or down arrows until the
current day appears. Touch
SELECT
. The hour
flashes.
5. Repeatedly touch the up or down arrows until the
current hour (and
7C
7C7C
7C
or
FC
FCFC
FC
) appears. Touch
SELECT
. The minute digit flashes.
6. Repeatedly touch the up or down arrows until the
current minute appears. Touch
SELECT
. The day
flashes.
7. If you made an error, repeat Steps 4–6 to correctly
set the values.