Filter
Top Products
42
Operation
Deleting a Learned Function
Note:
If no key is pressed for 60 seconds, the remote
control automatically exits setup.
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
appears, and
the remote returns to the previous mode screen.
1. Hold down
P
for at least 3 seconds.
9E:;ý I;J
9E:;ý I;J9E:;ý I;J
9E:;ý I;J
appears.
Note:
To exit setup, hold down
P
for at least 3 sec-
onds.
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
appears, then the last-used mode
screen.
2. Touch the down arrow key three times until
:;B
:;B:;B
:;B
B;7HD
B;7HDB;7HD
B;7HD
appears.
Note:
If you scroll past
:;Bý B;7HD
:;Bý B;7HD:;Bý B;7HD
:;Bý B;7HD
, touch the up
arrow to return to it.
3. Touch
SELECT
. The last selected device appears.
4. If necessary, touch a device key (
TV
,
VCR/DVD
,
CAB/
SAT
,
RECVR
,
AUX 1
,
AUX 2
,
AUX 3
, or
AUX 4
) that
contains the learned function. The selected mode
appears.
Note:
Do not use the arrow keys to locate the
desired device.
5. Touch the key that contains the learned data you
want to delete.
:;B;J;:
:;B;J;::;B;J;:
:;B;J;:
appears. If the key cannot
be deleted,
?DL7B?:
?DL7B?:?DL7B?:
?DL7B?:
appears.
To delete other learned functions for the same
device, repeat Step 5. To delete learned functions
on other devices, repeat Steps 4 and 5.
6. To exit programming, hold down
P
for at least 3 sec-
onds.
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
appears, then the last-used mode
screen.
USING KEY MOVER
Your remote control also includes a key mover feature
that allows a key to be copied from one device to anoth-
er, or to a different position in the same device mode.