Filter
Top Products
33
Preparation
Enter the channel
0 6 1
by touching each key.
Hold down
SELECT
until
IK99;II
IK99;IIIK99;II
IK99;II
appears.
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
appears, then the last-used mode screen.
PROGRAMMING A TIMED MACRO
SEQUENCE
You can use timed macro sequences to store up to 15
keystrokes (including learned keys) to be run on a spe-
cific day and time.
You can also use timed macro sequences to turn on a
device for a preset time period on a daily or weekly ba-
sis. For example, you can use it as an alternative meth-
od of recording an hour-long soap opera (that starts at
2:00 PM on Channel 4, each weekday) on your VCR.
Note:
If no key is pressed for 60 seconds, the remote
control automatically exits setup.
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
appears, and
the remote returns to the previous mode screen.
Follow these steps to program a timed macro sequence.
1. Turn on all home entertainment devices.
2. Hold down
P
for at least 3 seconds.
9E:;ý I;J
9E:;ý I;J9E:;ý I;J
9E:;ý I;J
appears.
Note:
To exit setup, hold down
P
for at least 3 sec-
onds.
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
appears, then the last-used mode
screen.
3. Touch the up arrow four times.
C79HEýI;G
C79HEýI;GC79HEýI;G
C79HEýI;G
appears.
Note:
If you scroll past
C79HEý I;G
C79HEý I;GC79HEý I;G
C79HEý I;G
, touch the down
arrow to return to it.
4. Touch
SELECT
.
8;=ýJ?C;
8;=ýJ?C;8;=ýJ?C;
8;=ýJ?C;
appears. The day and time
appear, with the day flashing.
5. Enter the beginning day and time of your TV pro-
gram. For this example, enter the following data:
Touch the up or down arrow until the desired day
appears (for the example, scroll to
C¶<
C¶<C¶<
C¶<
). Touch
SELECT
. The hour flashes.