Filter
Top Products
36
Operation
ˆ
Operation
If you have any problems operating your remote, call
customer service at 888-269-8705.
SELECTING A DEVICE
Once you have programmed your remote control, use
the following steps to become familiar with the selection
and control of your devices.
1. Pick up the remote control or touch the touch screen
once, anywhere on the screen, to activate the dis-
play. The default mode is set to TV.
Note:
When the remote control is not in use, the
touch screen turns off after a preset time to con-
serve battery life. When activated, the remote con-
trol remembers and displays the last-used mode.
2. Point the remote control at the device you want to
control.
3. Using the Mode Keys, touch a desired device key
(for example,
VCR/DVD
). If necessary, touch the
MODE SHIFT
key repeatedly to display other device
choices. The selected device appears, along with
the appropriate remote control keys. Refer to “A
Quick Look at the Keys” on Page 6 to view lists of
the available keys for each device.
CONTROLLING A SELECTED DEVICE
Press or touch the appropriate hard and soft keys to
control a desired function. For example, from the VCR
mode, press
POWER
(hard key) to turn on the VCR.
Then insert a tape and touch
PLAY
(soft key) to start
playback.
Refer to “A Quick Look at the Keys” on Page 6 for tables
of the available keys for each device and their functions.
Note:
The selected device will not respond if it has not
been set up. Check the following table to see if the de-
fault factory settings cover any of your system devices. If