Filter
Top Products
28
Preparation
Important:
You can store up to 10 channels. If you
store ten channels, the remote control will automati-
cally exit the program.
IK99;II
IK99;IIIK99;II
IK99;II
appears, then
;N?J#
;N?J#;N?J#
;N?J#
?D=
?D=?D=
?D=
. If you want to store less than 10 channels, hold
down
SELECT
for at least 3 seconds after entering
the last desired channel.
IK99;II
IK99;IIIK99;II
IK99;II
appears, then
;N?J?D=
;N?J?D=;N?J?D=
;N?J?D=
.
PROGRAMMING MACROS
Your remote control has three macro keys (
1M
,
2M
, and
3M
) you can use to program commonly-used operations.
You can store up 15 keystrokes (including learned keys)
on each macro key. For example, you can create a mac-
ro that will instantly power on the TV and cable box and
then tune-in a favorite channel.
1. Turn off all home entertainment devices.
2. Hold down
P
for at least 3 seconds.
9E:;ý I;J
9E:;ý I;J9E:;ý I;J
9E:;ý I;J
appears.
3. Touch the down arrow four times.
C79HEý A;O
C79HEý A;OC79HEý A;O
C79HEý A;O
appears.
Note:
If you scroll past
C79HEý A;O
C79HEý A;OC79HEý A;O
C79HEý A;O
, touch the up
arrow to return to it.
4. Touch
SELECT
.
I;BýC79HE
I;BýC79HEI;BýC79HE
I;BýC79HE
appears.
5. Press a macro key (
1M
,
2M
, or
3M
).
;DJý C79HE
;DJý C79HE;DJý C79HE
;DJý C79HE
appears. For the example, press
1M
.
Note:
Pressing a previously-programmed macro
key will overwrite its contents.
6. Press the appropriate keys in the desired order.
For the example, entering the following keys in the
below order to program
1M
to turn on the TV and
cable box, then tune the cable to channel 061.
Touch
TV
.
I;BýJEý;D:
I;BýJEý;D:I;BýJEý;D:
I;BýJEý;D:
appears.
Note:
I;Bý JEý ; D:
I;Bý JEý ; D:I;Bý JEý ; D:
I;Bý JEý ; D:
prompts you to press
SELECT
when you reach the end of the macro sequence you
are entering.