Filter
Top Products
32
Preparation
Programming Home Theater Macros
The Home Theater mode also includes three exclusive
macro keys (
SET 1
,
SET 2
, and
SET 3
). You can store up
to 15 keystrokes (including learned keys) on each macro
key. For example, you can create a macro that powers
on each device in your home theater system with the
convenience of a single key touch.
Note:
Macros can include learned keys, but not moved
keys.
1. Turn off all home entertainment devices.
2. Hold down
P
for at least 3 seconds.
9E:;ý I;J
9E:;ý I;J9E:;ý I;J
9E:;ý I;J
appears.
3. Touch the down arrow four times.
C79HEý A;O
C79HEý A;OC79HEý A;O
C79HEý A;O
appears.
Note:
If you scroll past
C79HEý A;O
C79HEý A;OC79HEý A;O
C79HEý A;O
, touch the up
arrow to return to it.
4. Touch
SELECT
.
I;BýC79HE
I;BýC79HEI;BýC79HE
I;BýC79HE
appears.
5. Press a macro key (
SET 1
,
SET 2
, or
SET 3
).
;DJ
;DJ;DJ
;DJ
C79HE
C79HEC79HE
C79HE
appears. For the example, press
SET 1
.
Note:
Pressing a previously-programmed macro
key will overwrite its contents.
6. Press the appropriate keys in the desired order.
For the example, entering the following keys in the
below order to program
SET 1
to turn on the TV and
cable box, then tune the cable to channel 061.
Touch
TV
.
I;BýJEý;D:
I;BýJEý;D:I;BýJEý;D:
I;BýJEý;D:
appears.
Note:
I;Bý JEý ; D:
I;Bý JEý ; D:I;Bý JEý ; D:
I;Bý JEý ; D:
prompts you to press
SELECT
when you reach the end of the macro sequence you
are entering.
Press
POWER
to turn on the TV.
Touch
CAB/SAT
to select the cable box.
Press
POWER
to turn on the cable box.