Filter
Top Products
8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
PROGRAMMING A DEVICE
The RadioShack 8-in-One Remote is preset at the factory to operate
the following devices:
• Motorola Cable Box
• RCA TV,VCR,DVD Player, Satellite Receiver,CD Player,and
Audio Receiver
• ReplayTV PVR (DVR) using the AUX key
To control devices other than the default brands,perform the following
steps; otherwise skip this section:
NOTE: To control a DVD Player/VCR Combo,perform the instructions in
“Programming A DVD Player/VCR Combo”on page 16.
1. Turn on a desired device (e.g.,VCR or DVD player) and,if applicable,
insert media (e.g.,cassette or disc).
NOTE: Please read steps 2 through 9 completely before proceeding.Before
starting step 2,review the “Manufacturer’s Codes”(starting on page 118).
Brands are listed alphabetically in order of the most popular codes first.
Highlight or write down the devices and the codes you wish to program.
2. Press and hold Puntil the bottom IR segment flashes twice.
The program keys will appear:
NOTE: If the display turns off due to inactivity,the remote will exit program-
ming and return to the last-selected device menu screen.To start programming
again,repeat this step.To stop programming at any time,press once to
return to the program keys screen.Press once more to exit completely.
3. Press above DEV SET once.The Device Setup programming screen
will appear:
14 Programming A Device
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 14