O
WNER
’
S
M
ANUAL
• Broken or defective product.
• Products that operate over 100 kHz.
• Infrared keyboards a nd infrared pointing devices (such as
mouse substitutes).
• All products for sale and/or use outside the continental United
States,Hawaii,Alaska,or Canada.
TROUBLESHOOTING
PROBLEM: No display at all times.
SOLUTION: Replace batteries with four new AAA alkaline batteries.
PROBLEM: No display when programming.
SOLUTION: Display has turned off due to inactivity.Start programming
again and do not pause while performing instructions.
PROBLEM: Remote Finder does not work.
SOLUTION: Replace battery with new 9-volt alkaline battery; also
verify Finder Receiver is enabled (see page 39).
PROBLEM: During programming,the bottom IR segment displays a
long flash.
SOLUTION: An invalid entry has occurred.Check the keys to be
pressed and start program again.
PROBLEM: How do I stop programming?
SOLUTION: Press once to return to the program keys screen.
Press it once more to exit completely.
PROBLEM: The unit does not control home entertainment devices
or commands are not working properly.
SOLUTION: Try all listed codes for the device brands being set up.
Make sure they can be operated with an infrared
remote control.
PROBLEM: Tried Searching For Your Code method and still could
not find a working code.
SOLUTION: Perform Restoring Factory Default Settings on page 40.
Then repeat Searching For Your Code on page 17.
PROBLEM: Cannot program a macro onto M1~ M4,PWR,or COM
MUTE keys.
SOLUTION: Make sure the total number of key presses being
programmed is less than 15.
continued on next page...
Upgrade Exclusions/Troubleshooting 43
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 43