Filter
Top Products
8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
SETTING THE TILT SWITCH
The RadioShack 8-in-One Remote contains a Tilt Switch that activates
the display when the unit is moved.If desired,you can disable it so
only pressing a key will turn on the display.
NOTE: Disabling the Tilt Switch can help conserve battery life.
DISABLING THE TILT SWITCH
1. Press and hold Puntil the bottom IR segment flashes twice.
The program keys will appear:
2. Press below OTHER once. The Other programming screen will appear:
3. Using the number keys,enter 9 8 5. The The bottom IR segment will
flash four times,confirming the Tilt Switch is disabled.The program
keys will appear again.
4. Exit programming by pressing once.The display will return to the
last-selected device menu screen.
ENABLING THE TILT SWITCH
1. Perform steps 1 and 2 of the previous section,Disabling The Tilt Switch.
2. Using the number keys,enter 9 8 5.The The bottom IR segment will
flash twice,confirming the Tilt Switch is enabled.The program keys
will appear again.
3. Exit programming by pressing once.The display will return to the
last-selected device menu screen.
38 Setting The Tilt Switch
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 38