Radio Shack 15-2138 Universal Remote User Manual


 
8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
USING CHANNEL SCAN
In the CBL,SAT,TV,VCR,or AUX mode,use FAV SCAN to start a 3-second
scan of all favorite channels (if programmed – see Programming Favorite
Channel Scan on page 30) and/or all channels for the selected mode.
1. If Favorite Channel Scan has been set up,skip to step 2.Otherwise,
press CBL,SAT,TV,VCR,or AUX once.The bottom IR segment flashes
once as the selected device key animates.
2. Press FAV SCAN once.The IR segments will display outgoing anima-
tion as each channel is changed.
•IfFavorite Channel Scan has been set up,scanning of favorite
channels will start and cycle through stored channels for 3 minutes
or until any key press stops it.
•IfFavorite Channel Scan has not been set up,scanning will start
with the current channel,then proceed to the next channel up
and cycle through all channels for 3 minutes or until stopped by
pressing any key.
3. To stop scanning channels at any time,press any key once.
USING MY SYSTEM MODE
The RadioShack 8-in-One Remote includes a custom Home Theater
mode.After MY SYSTEM is programmed,it will allow you to access four
groups of remote control keys without having to change device modes.
CONTROL ORGANIZATION
ABOUT CONTROL GROUPS
For Home Theater programming,the remote’s keys are grouped by type
of control into the following four control groups:
Video Playback Group:Transport controls (REW,PLAY,FWD,
REC,PAUSE,and STOP)
Volume Controls Group: VOL ,VOL,and MUTE
Channel Controls Group: CH ,CH ,INPUT,number keys (0~ 9),
TV/VCR,FAV SCAN,ENTER,and LAST
Menu Controls Group:Cursor controls (,,,and ),
OK,PAGE+, PAGE-,MENU, INFO,GUIDE,
and EXIT
ABOUT DEVICE MODES
Moreover, the above Control Groups can be used in the following modes:
Video Playback Group: CBL,SAT,DVD, AUD,VCR,AUX,and CD
Volume Controls Group: CBL,SAT,TV, DVD,AUD,VCR, AUX,and CD
32 Using Channel Scan/Using My System Mode
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 32