Filter
Top Products
61
Chapter 5: Additional Information
How to find your TV’s Video Input Channel
In order to see what’s playing on your DVD Player, you need to tune the TV to the Video Input Channel that corresponds to the
jacks you used to hook up the recorder to the TV. The Video Input Channel(s) varies for different brands and different models of
TVs. Below are some things to try.
• Consult the Owner’s Manual that came with your TV.
• If you can’t find the information in the manual, or can’t find the manual, review the following list of ways to access Video
Input Channels on TVs.
• There might be a button on the TV’s remote control that accesses the Video Input Channel (see table below for examples).
• You might select the Video Input Channel from the TV’s menu system.
• You might tune to it by pressing a specific channel number (see table below)
• Press the Channel up and/or down buttons on the TV’s remote control (sometimes the Video Input Channel is stored in the
channel list).
Video Input Channel Variations
Button/Switch Button on the Channel
on the TV TV remote
Number
VIDEO VID1 S-VID 00 93
SIGNAL LINE INPUT 90 VID 1
VID 1 VID SOURCE 91 VID 2
VID 2 VIDEO AUX 92 INPUT
1590940A 3/7/02 9:22 AM Page 61