Filter
Top Products
Connections & Setup
Chapter 1 9
Graphics contained within this publication are for representation only.
Setting Up Your TV
There are several steps you need to follow before you can turn on the TV. Follow the
instructions below to setup and turn on your TV.
ON/OFFMENU VOL CH
Plug in the TV
Plug the end of the cord from the power adapter into the DC POWER
IN jack on the bottom panel of the TV. Then connect the end of the
power cord into the other end of the power adapter. Plug the end
of the power cord into an appropriate wall outlet. Be sure to insert
the plug completely. Do not plug into an outlet controlled by a light
switch.
Put Batteries in the Remote
• Remove the battery compartment cover from the back of the remote by pushing down on
and sliding off the cover.
• Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly.
• Replace the cover.
Turn on the TV
The fi rst time you turn on your TV you need to turn on the main power to the TV by pressing
the Power button on the TV’s front panel. Then press the ON/OFF button on the TV or
ON•OFF button on the remote to power on the TV.
Adjust the TV Screen
The TV’s screen is adjustable simply by pushing on the top, front part of the screen, while your
other hand holds the base of the TV.
AFC030.indb 9AFC030.indb 9 4/13/05 6:51:12 PM4/13/05 6:51:12 PM