RCA L1510 Flat Panel Television User Manual


 
Chapter 2: Using the TV’s Features
Chapter 2 13
Graphics contained within this publication are for representation only.
About the Channel Banner
The Channel Banner appears when you press the INFO button on the
remote or the button corresponding to the function. The following list
describes the items on the Channel Banner screen (left to right and top
to bottom). Other displays that are not shown are self-explanatory.
The icons change appearance to show the item’s status or availability.
VGA Displays the current input you’re viewing. Displays the current
channel when you’re watching TV.
Mute Icon Displays when you mute the sound.
Sleep Timer: 20 minutes Corresponds to the SLEEP button. Shows
how much time is set before the TV turns off.
Volume Displays the level of the volume when you press the
VOL + or - button. The volume level has 100 steps.
Why You Should Use the Autotuning Feature
The autotuning feature tunes the TV to the correct channel for different components you have
connected to your TV (like a VCR or DVD Player). When you set up autotuning in the menu
system, you don’t have to remember to change your TV to channel 3, for example, when you
want to watch the tape in your VCR.
Note: Auto Tuning is not available with your remote. You must have a universal remote
(sold separately) to use the auto tuning feature.
How to Set Up the Autotuning Feature
The way you set up the autotuning feature in the TV’s menu corresponds to the component
buttons on the remote and the way you have each component connected to your TV. When
you set up autotuning, you’re telling the TV what channel to tune to when you press the VCR
or DVD button on the remote control.
1. Press MENU (the MAIN MENU appears).
2. Highlight Setup and press OK on your remote control.
3. Highlight Autotuning and press OK.
4. Choose which channel you want to set:
Set VCR Ch/Input Lets you set up the channel the TV tunes to when you press the VCR
button.
Set DVD Ch/Input Lets you set up the channel the TV tunes to when you press the DVD
button.
Set SAT/CAB Ch/Input Lets you set up the channel the TV tunes to when you press the
SAT/CAB button.
Set AUX/HD Ch/Input Lets you set up the channel the TV tunes to when you press the
AUX/HD button.
5. Press the right arrow button to select the choice that matches the way you have the
component connected to this TV.
The choices and a brief explanation follow:
Sleep Timer: 20 minutes
VGA
Volume 38
AFC030.indb 13AFC030.indb 13 4/13/05 6:51:15 PM4/13/05 6:51:15 PM