Filter
Top Products
Chapter 2 25
Using the Remote Control
3. Press and release the device button (SAT•CABLE, AUX or DVD) you want to program.
4. Repeatedly press and release the ON•OFF button, watching for the device to respond. If it does
turn off, press and release the OK button within 3 seconds to save the code. If you accidentally
passed the code before saving it, press the left arrow button to backtrack through the codes; then
use the right arrow button to go forward through the codes again.
When all codes have been searched, the device button ashes 3 times, then the remote exits manual
code search and returns to normal operation.
Using Automatic Code Search
1. Turn on the device you want to control.
2. On your remote control, simultaneously press and hold ON•OFF and MUTE (approximately 3
seconds) until a device button remains lit. Then release the buttons.
3. Press and release the device button you want to program.
4. Press and release the ON•OFF button once. There is a delay of approximately 6 seconds before
the remote starts the code search.
The device buttons blinks each time the remote control sends a code to test for your device.
Keep pointing the remote at the device.
5. Once the device turns off, quickly press the OK button to save the code.
6. If you accidentally passed the code before saving it, press the left arrow button to backtrack
through the codes; then use the right arrow button to go forward through the codes again.
When all codes have been searched, the device button ashes 3 times, then the remote exits
automatic code search and returns to normal operation.
How to Use the Remote After You’ve
Programmed It
Once the remote has been programmed successfully, you are ready to use it to operate your devices.
To Operate the Device:
1. Press the appropriate device button (SAT•CABLE, AUX, DVD) to set the remote to control the
device.
2. Press ON•OFF to turn the device ON or OFF.
3. Use the remote buttons that apply to that device.
Notes: The remote control may not be compatible with all brands and models of devices.
Some of the remote buttons might operate differently for other devices, especially when you’re
using another device’s menu system.
Modes of Operation
Because this universal remote can control several different devices (DVD player, VCR, cable box,
etc.) it uses operational modes triggered by the device buttons. For example, if you want the remote
control to operate the TV, press the TV button to put the remote into TV mode. If you want the
remote to operate the DVD player, press the DVD button.
The button corresponding to the mode the remote is in lights up when you press any button that
works in that mode. For example, if you’re in TV mode and you press the VOL+ button, the TV
button lights up. This tells you that the command to increase the volume is being sent to the TV (and
not the satellite receiver, for example).