Filter
Top Products
44 Chapter 4
Using the TV’s Menu System
Picture Menu
The Picture menu contains menus and controls to congure the following video
settings: Advanced picture settings, Picture presets, Black level, Color, Contrast,
Sharpness, Color Warmth, and Tint. The Picture menu options apply to the
video for the main TV and video input selections.
Advanced picture settings
Contrast expand You can adjust the contrast of the picture to suit the light
of the room. Press the right arrow button to choose which of the following
best describes the lighting in the room: Low, Medium or High.
Scan Velocity Modulation Improves the sharpness of the picture by
changing the speed of the cathode-ray tube’s electron beam when it
transitions between dark and light areas of the screen. Choose to have it on
(box checked) or off (box unchecked), depending on your preference.
Autoformat When enabled (box checked) the TV automatically selects the
best screen format for the incoming signal for analog channels and inputs.
The Autoformat feature is not available for digital channels.
Video noise reduction Reduce picture “static” or any type of interference.
This feature is especially useful for providing a clearer picture in weak
analog signal conditions. Press the right arrow button to choose between:
Off for no noise reduction; Minimum for a softer, smoother picture that
retains picture sharpness and detail; Medium for a slightly softer picture
than the Minimum setting; Maximum for an even softer, smoother picture
than the other settings (the picture detail is somewhat decreased).
Optimized still picture When enabled (box checked), enhances the picture
specically for still frames (for example, if you're watching a slide show on
your HDTV, or if you've paused a frame of a DVD).
Auto Skin Tone When enabled (box checked), minimizes the esh tone
variations of the TV picture.
Film mode (3:2 Pulldown) Automatically detects video sources that were
originally recorded on lm (like most movies) and subsequently converted
to a different format (for TV broadcast, for example). Film mode processes
the converted signal so that it looks as close as possible to the original.
Another name for this process is reverse 3:2 pulldown.
Note: Film mode is not available for digital channels.
Advanced (recommended) enables the feature only when the TV
detects that movie playback quality could be improved. Advanced is
the default setting.
The On setting should only be used in rare circumstances when
the TV is used solely with lm-based sources (like DVDs on a non-
progressive-scan player).
The Off setting turns off lm mode upconversion. Try using this
setting if you think the reverse 3:2 pulldown is causing distortions in
your picture.
Note: Autoformat and Video noise reduction are available for the CMP1
and CMP2 inputs only if the signal is 480i.
Go back
Advanced picture settings
Picture preset
Black level
Color
Contrast
Sharpness
Color warmth
Tint
...
Sports...
Cool...
PICTURE
Go back
Contrast expand
Scan Velocity Modulation
Autoformat
Video noise reduction
Optimized still picture
Auto skin tone
Film mode (3:2 Pulldown)
Low...
Minimum...
Auto...
Adv
. pict. setting
s
Tip:
If the picture is switching screen formats
abruptly during normal TV viewing, switch the
Autoformat feature off.