RCA R52WH79 Flat Panel Television User Manual


 
Other Information
54 Chapter 5
Frequently Asked Questions (FAQs)
What’s the quickest way to view High Definition (HD) video?
Connect an off-air antenna to the ANTENNA DIGITAL INPUT to view local digital channels. You might need to
purchase an antenna. Go to page 18 for more information.
How do I tell an analog channel from a digital channel?
There are several different ways to tell if your channel is digital or not. Press the INFO button to display the channel
banner. Look at the lower left corner for a channel number. Channels with a primary channel and a subchannel are
digital channels, but not all digital channels have subchannels. The lower left side shows a 'D' for digital channels and
an 'A' for analog channels. If it's a digital station you might also see a digital TV program title and description shown.
Page 33 also has more information.
Why does channel search find a lot of channels, but when I try to tune to them there’s nothing there?
Some channels are enabled by the cable company that don’t carry programming, such as video-on-demand. You
probably want to get rid of these so they no longer appear in your channel list. Remove these in the Channel List
menu. Go to page 17 for more information.
Why does the first channel search take a long time?
If you’re searching for analog and digital (both) in the Channel Search menu, the TV is looking for all available
channels in the channel list. If you do have digital channels, the TV is also searching for each subchannel of that
digital channel.
How do I control other devices I’ve connected to the TV?
Because your TV came with a universal remote, you can program your remote to the button corresponding with the
device you have connected to your TV. Go to page 24 for information on programming your remote.
Why are there black bars on my screen and can I get rid of them?
Analog channels are normally sent in a 4:3 format, which cannot ll a 16:9 screen like your TV. Most digital channels
are sent in a 16:9 format which do ll your screen, but sometimes are sent in 4:3. It depends on how the broadcaster
or device connected to your TV formatting the video. Aspect ratios are determined by the broadcaster and may change
from one program to another. The Autoformat feature in the menu allows the TV to select the best picture format for
the signal received. Go to page 44 for more details.
You can use the FORMAT button on the remote to see the different formats available that might eliminate the black
bars. The format type is displayed on screen. No other options are possible aside from those you see by cycling
through with this button.
Note: Format control is not available for digital 16:9 broadcasts.