Filter
Top Products
10
RCU800
Program for AUX—Direct Entry Method
The AUX key can be used to control any of the following components:
TV, VCR, DVD/CD, Satellite Receiver, Cable Box, or an Audio component.
INDICATOR
LIGHT
1. Manually turn on the component you wish to control.
Locate the enclosed component list. Find your component
brand under the corresponding component list.
2. Press and hold the CODE SEARCH key until
the INDICATOR LIGHT illuminates, then release the
CODE SEARCH key.
3. Press and release the AUX key (The INDICATOR LIGHT
will blink then remain lit). Then press the key for the
component you want to program (TV, VCR, DVD, DBS•SAT,
CABLE, AUDIO). Press the DVD key to program the AUX key
for a CD player.
4. Use the number keys on the remote to enter the first code
listed for your brand. After you enter a valid three-digit
code, the indicator light turns off.
Note: If you enter an invalid code, the LED flashes rapidly
for two seconds. Start over at step 2.
5. Aim the remote at the component you wish to control and
press the ON•OFF key. If your component turns off, you
have found the correct code.
6. Enter the code in the box provided on this page for
future reference.
(BLINK)
(OFF)
AUX CODE
TV VCR CABLE DBS
✓
CD AUDIO LD DVD
ON•OFF
RCU800B_IB_REVB.qx4 2/11/04 13:05 Page 10