Filter
Top Products
7
RCU800
DVD OR CD CODE
Program for SATELLITE—Direct Entry Method
In order for the eight-component universal remote to control your DBS system, you must program
it with the code that matches your SATELLITE receiver. To program your remote to control your DBS
system, follow these steps:
1. Manually turn on the satellite receiver.
2. Locate the enclosed SATELLITE Code List. Find your
brand in the SATELLITE Codes.
Note: If your brand isn’t listed, use one of the Code Search
methods to program this remote control. (See section on Code
Search on page 11).
3. Press and hold the CODE SEARCH key until the indicator
light illuminates. Then release the CODE SEARCH key.
4. Press and release the DBS•SAT key. The indicator light
blinks and then remains lit.
5. Use the number keys on the remote to enter the first code
listed for your brand. After you enter a valid three-digit code,
the indicator light turns off.
Note: If you enter an invalid code, the LED flashes rapidly
for two seconds. Start over at step 3.
6. Aim the remote at the SATELLITE receiver. Press the ON•OFF
key. If your SATELLITE receiver turns off, you have found
the correct code.
7. Enter the code in the box provided on this page
for future reference.
8. If your SATELLITE receiver does not turn off, repeat
steps 3-6 above, entering the next code for your brand.
If none of the codes work or your brand is not listed,
use one of the Code Search methods to program this
remote. (See Code Search section on page 11).
6. Aim the remote at the component. Press the ON•OFF key.
If your DVD/CD system turns off, you have found the
correct code.
7. Enter the code in the box provided on this page
for future reference.
8. If your DVD/CD system does not turn off, repeat steps
3-6 above, entering the next code for your brand.
If none of the codes work or your brand is not listed,
use one of the Code Search methods to program this
remote. (See Code Search section on page 11).
(BLINK)
DBS (SATELLITE) CODE
CODE
SEARCH
INDICATOR
LIGHT
(OFF)
ON•OFF
ON•OFF
DBS•SAT
RCU800B_IB_REVB.qx4 2/11/04 13:05 Page 7