Filter
Top Products
22 Mounting the Mast
c. Push the straps side-to-side to snap them off flush with the wall.
No
Yes
Mounting the Dish on a Hollow or Cinder Block Wall
Step 8: Make sure that the top of the mast will point straight up.
Step 6c: Snap off straps flush with the wall.
d. Repeat for all four holes.
7. Use a wrench to loosen the nuts on the mounting foot so you
have easier access to the mounting holes.
8. Hold the mounting foot over the holes so the top part of the mast
will rotate and point straight up.
9. Place washers on each of four #20, 1/4" x 3" machine screws and
attach the mounting foot to the wall. Securely tighten the screws.
10. Go on to the next section, “Final Installation,” to complete the
installation process.