Filter
Top Products
45
below for help finding your wireless access point’s password.) Enter your password
using the Left/Right arrow keys to navigate between characters. Press Up to enter into
uppercase mode, and Down to go back to lowercase. When you’re done, press Down
again to go to and select OK.
- Select “OK” to reboot the unit. Upon restarting, SoundBridge should automatically
connect to the network you have specified.
If the connection is successful, all the available music libraries will be listed on your screen. Use
the up and down arrows on your remote to navigate to your desired library and press Select
[4] to begin browsing your music library.
Troubleshooting Wi-Fi Setup
If you have problems connecting to the SoundBridge to your music library via Wi-Fi, please
check the following:
1. Make sure the SoundBridge is powered on (the LED screen is lit). M2000 and M500
models: Are the LED lights lit up inside the CompactFlash Wi-Fi adapter? If not, your card
is not receiving power. Remove and re-insert the CF card with the label facing away from
you. It should require gentle pressure to be inserted into the CF slot.
2. Is SoundBridge within range of your wireless network signal? Performance varies
depending on wireless network hardware, physical barriers such as walls, and signal
interference.
3. Is your computer on and your wireless access point plugged in?
4. Is your music server software running on your computer? Are your music sharing options
enabled? (See “Enabling Music Sharing” on page ##.)
{#}
5. Did you enter your password correctly (if you have one), including case sensitive
characters?
Visit our FAQ and User Forum at
www.rokulabs.com/support