Filter
Top Products
135
Network
7
7 Network
7.3 MagicInfo Lite Settings
MENU [] Network MagicInfo Lite Settings ENTER
[ ]
1 Server
Server (Setting the MagicInfo Lite Server IP)
Enter the server IP address and port number. Use 7001 as the port number.
If unable to connect to the server using port number 7001, check with your server
administrator to find the correct port number and then change the port number.
FTP Mode
Select an FTP operating mode: Active or Passive.
Default Storage
Specify the default memory to save schedules or content sent from the server to.
If the default storage space is set to USB, a schedule will not run if a USB device is not connected.
Send a notification message to the server when internal memory is used up.
2 Storage
Internal Memory: Displays the space currently being used or deletes all content.
USB: Displays the space currently being used.
3 Schedule Name
Select a schedule title format when creating a local schedule.
YYYYMMDD, YYYYDDMM, DDMMYYYY
4 Information
Device Name: Displays the name of a device recognized by the server.
Serial Number: Displays the original identification number of a device.
Software Version: Displays the software version of a device.
Refer to 195 page for details about the MagicInfo Lite Player menu.
m