Filter
Top Products
English - 23
Connecting & Setting Up
Connecting HDMI/DVI to a
TV
If your TV has a HDMI/DVI input, connect HDMI/DVI
Adapter cable to a TV. You will enjoy the best quality
images and sounds.
● Case 1 : Connecting to a TV with HDMI Jack
● Case 2 : Connecting to a TV with DVI Jack
Case 1
: Connecting to a TV with
HDMI Jack
• Using the HDMI cable connect the HDMI OUT
jack on the rear of the HDD & DVD RECORDER to
the
HDMI IN jack of your TV.
• Press the input selector on your TV remote control
until the HDMI signal from the HDD & DVD
RECORDER appears on your TV screen.
Case 2
: Connecting to a TV with DVI
Jack
• Using the DVI Adapter Cable, connect the HDMI OUT
jack on the rear of the HDD & DVD RECORDER to
the
DVI IN jack of your TV.
• Using the audio cables, connect the
AUDIO (red and
white) OUT
jacks on the rear of the HDD & DVD
RECORDER to the
AUDIO (red and white) IN jacks
of your TV. Turn on the HDD & DVD RECORDER and
TV.
• Press the input selector on your TV remote control
until the DVI signal from the HDD & DVD RECORDER
appears on your TV screen.
HDMI (High Definition Multimedia
Interface)
HDMI is an interface to enable the digital
transmission of video and audio data with
just a single connector. Since HDMI is based
on DVI, it is completely compatible with DVI.
The only difference between HDMI and DVI
is that HDMI supports multi-channel audio.
Using HDMI, the HDD & DVD RECORDER
transmits a digital video and audio signal and
displays a vivid picture on a TV having an
HDMI input jack.
NOTE
white
red
white
red
■
To use HDMI cable, make the cable
connection before plugging in the power
cord or after finishing the “plug &
autosetup.” Do not connect the HDMI
cable while the “plug & autosetup” is
progressing.
■
Progressive scan automatically activates
when HDMI is connected.
■
If your TV does not have Bitstream
decoder, you must set the digital audio
output to PCM in order to watch through
the HDMI output. (See pages 38~39)
■
Depending on the HDMI device (TV/HDMI
Receiver) you use, audio may not be
supported. If TV/HDMI Receiver does not
support Dolby digital, Audio output is not
available when you set Digital output as
'Bitstream' in Audio setup menu. In this
case, set the digital audio output to PCM.
If TV/HDMI Receiver does not support
DTS, Audio output is not available when
you play disc in DTS format.
■
You can switch from the HDMI output to
other output only in stop mode.
CAUTION
2-00852A-XEU_18-24_CONNECT 2005.7.1 6:5 PM Page 23