Filter
Top Products
English - 43
System Setup
Canceling the
Progressive scan
1
With the unit in Stop mode, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Interlace
scan mode. Otherwise, press [No]” will appear.
Press the
œ √ buttons to select Yes, and then
press the
OK button.
2
The message “Please, set your TV to Interlace
input. To deactivate, press [STOP] key.” will
appear. Press the OK button.
3
The message “Video Output Mode Interlace Scan”
will appear.
■
Do not press the P.SCAN button if you are
using a TV that does not support
Progressive mode. Nothing will be
displayed on the screen if pressed.
■
If you press the P.SCAN button by mistake
when your TV does not support Progressive
mode, you need to release the Progressive
mode. To release the Progressive mode,
press the
P.SCAN button on the front panel
3 times. The screen will recover after the
PS indicator on the front panel display
turns off.
NOTE
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No]
Yes No
Please, set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
Video Output Mode
Interlace Scan
3-00000A-XEU_25-45_SETUP 2005.6.21 6:59 PM Page 43