Filter
Top Products
_ System setup
System setup
Press the or
+
button, then option
display.
Press the
$%
buttons to select On or Off, then press the
button.
Press the
%
button to select , then press the button.
Digital auto scan will be started.
After auto channel scan is completed, the message "Your digital
receiver found" will be displayed.
Press the button.
Analogue auto scan will be started.
After auto channel scan is completed, auto clock setting will be
started automatically in 10 seconds. If you want to start auto
clock setting immediately, press
button.
Wait until current date and time are displayed automatically.
If you want to exit auto clock setting, press
button.
Now your HDD & DVD Recorder is ready for use. If you wish to
retune, you can by using the “Channel Set - Manual Setup
(Analogue)” menu. (See pages 36~37)
Auto setup function can be performed by pressing STOP ( ) on the
unit continuously for 5 seconds or more during power off with no
disc inserted.
Check the date and time.
If it is Correct, press button then the date and time will be
saved. If you don’t press the button, the date and time will
be saved automatically after 5 seconds.
If it is Incorrect, input correct , , , or
using
$%
,
_ +
buttons or number buttons. Press
button then the date and time will be saved. When you need to
change clock setting, you can set up it manually.
.
.
.
.
10.
11.
M
1.
•
•
Initial Installation
Country
Language
Time Zone
Daylight Saving Time
: United Kingdom
►
: English ►
: GMT + 00:00 ►
: Off ►
OK
Off
On
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
Auto Scanning
Progress
eEXIT
ATV
3
PR CH Name
1 004
----
2
---
----
3 072
----
Clock Set
mo. da. yr. hr. min. Auto
JAN 01 2009 12 00 On
Tuesday
Auto Scanning
Digital 594.000MHz, BW:8MHz, FFT:Auto
DTV
5
BBC ONE
BBC TWO
BBC THREE
BBC NEWS 24
BBCi
CBBC Channel
Radio
5
Progress
Signal status
eEXIT
Your digital receiver found
OK
DTV
5
Radio
5