Samsung DVD-VR355 DVR User Manual


 
Getting Started
English - 10
Step 4 : Playing
To start playback, select the title you want to play from the
title list.
A DVD consists of sections called titles, and sub sections
called chapters.
During recording, a title is created between two points
where you start and stop recording. Chapters will be
created automatically when you nalize recording on
DVD-R/DVD-RW discs in Video mode.
You can make your own chapters on DVD+RWs and edit
them using the Chapter Edit menu.
The chapter’s length (interval between chapters) varies
according to the recording mode.
Step 5 : Editing a recorded disc
Editing on discs is easier than conventional video tapes.
The recorder supports many different edit functions,
possible only with DVDs.
With a simple and easy edit menu, you can operate various
edit functions, such as delete, copy, rename, lock, etc., on
a recorded title.
Creating a playlist (DVD-RAM/-RW in VR mode)
With this recorder, you can create/edit a new playlist on
the same disc without changing the original recording.
Step 6
:
Finalizing & Playing on other
DVD components
To play your DVD on other DVD players, nalizing may
be necessary. First, nish all editing and recording
operations, then nalize the disc.
When using a DVD-RW disc in VR Mode
Although nalizing is generally unnecessary when playing
the disc on a VR Mode compatible component, a nalized
disc should be used for playback.
When using a DVD-RW disc in Video Mode
The disc should be nalized rst to enable playback
on anything other than this recorder. No more editing
or recording can be made on the disc once it has been
nalized.
When using a DVD±R disc
You should nalize the disc to play it on other DVD
players. No more editing or recording can be made on the
disc once it has been nalized.
You can nalize automatically using the EZ REC
MODE. (See page 64)
Unpacking
Accessories
Check for the supplied accessories below.
Connecting the Power Cord
After all connections are complete, plug the power cord
into a wall outlet.
“Auto” appears in the front panel display. This means
that the current time is being set automatically
through the antenna under connection(Auto Program).
The setup may take several minutes.
When the DVD Recorder & VCR operates normally, the
current time is automatically set and displayed in the front
panel display.
Video/Audio Cable
(AC39-00073A)
RF Cable for TV
(AC39-42001J)
Batteries for Remote Control
(AAA Size) (AC43-12002H)
Instruction Manual
(AK68-01343A)
Quick Guide
(AK68-01347A)
Remote Control
(AK59-00062G)
01343A-VR355-XAC-ENG.indb 1001343A-VR355-XAC-ENG.indb 10 2007-03-23 오후 6:49:072007-03-23 오후 6:49:07