Filter
Top Products
Connections
English - 20
Connecting the Video Cable
There are several ways to connect your DVD Recorder & VCR. Select one of the video connections on the
following pages.
You must use one of the following audio/video connections on this unit.
Connecting to Component Video Input Jacks (Y,P
B
,P
R
)
Connect Component video cables (not supplied) between the COMPONENT OUT (Y,P
B
,P
R
) jacks on DVD
Recorder & VCR and COMPONENT IN (Y,P
B
,P
R
) jacks on your TV.
▌
• You will enjoy high quality images. Component video
separates the picture element into black and White(Y),
blue(P
B
), red(P
R
) signals to present clear and clean
images.
• Connect the audio cables(white and red) between the
Component AUDIO OUT jacks on the DVD Recorder &
VCR and Component AUDIO IN jacks on your TV(or AV
amplifi er). (See pages 21~23)
• Progressive scan
- If your TV supports Progressive Scan, you can enjoy
higher quality video by pressing the P.SCAN button.
(The component cable has to be connected.)
1. With the unit in Stop mode, press the P.SCAN button
on the front of the DVD Recorder & VCR.
2. The message “Press “Yes” to confi rm Progressive
scan mode. Otherwise press “No”” will appear. Press
the ◄ ► buttons to select Yes, and then press the
ENTER button.
Compared to standard interlaced video,
progressive scan doubles the amount of video
lines fed to your TV, resulting in a clearer, more
stable, and fl icker free image than interlaced
video. The component output jack of the DVD
player can be used for progressive output mode,
which is only available with TVs that support
progressive scan.
Progressive Scan Output (480p)
Consumers should note that not all high defi nition
television sets are fully compatible with this
product and may cause artifacts to be displayed
in the picture. If you experience 480p progressive
scan picture problems, it is recommended that you
switch the connection to the ‘standard defi nition’
output. If there are questions regarding TV set
compatibility with this model, please contact our
customer service center at 1-800-SAMSUNG.
The Component jacks will not output video
resolutions above 480p. To view 720p and 1080i,
connect the DVD-VR355 to your TV with an HDMI-
HDMI cable. With HDMI connected, press the
P.SCAN button to alternate between all available
resolutions. (See page 34)
■
■
■
(P.SCAN Button)
01343A-VR355-XAC-ENG.indb 2001343A-VR355-XAC-ENG.indb 20 2007-03-23 오후 6:49:452007-03-23 오후 6:49:45