Filter
Top Products
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
108
5.6 Event Setup
This menu allows the user to determine DVR-4TH/ 8TH/ 16TH series
behavior in response to an alarm event. In the Main menu, move the cursor to
<Event Setup> and press ENTER. The following menu is displayed.
Event Setup
Internal Buzzer
Event Icon
Email Notice
Email Attachment
Alert Notification Setup
Event Full Screen
Event Duration
Per Channel Config
ON
ON
OFF
OFF
None
20 Sec
5.6.1 Internal Buzzer
This item allows user to enable / disable the DVR-4TH/ 8TH/ 16TH series
internal buzzer. If set to <ON>, the buzzer is activated in response to an alarm.
If set to <OFF>, the buzzer is not activated. The default setting is <ON>.
5.6.2 Event Icon
This item enables (ON) / disables (OFF) the display of an Event Icon on the
main monitor when an alarm event occurs. The default setting is <ON>
(enable). The event types are represented by a character respectively; the
descriptions are listed in the following table.
Event type Description
A
Alarm in event
M
Motion detection event
L
Video loss event
5.6.3 Email Notice
The item enables (ON) / disables (OFF) the Email notification of an event.
When an alarm event is triggered and <Email Notice> is enabled, an e-mail
concerning the alarm event will be sent. The default setting is <OFF>.
NOTE: In order to send an event notification e-mail successfully,
ensure that the unit connects to the Internet.