Filter
Top Products
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
117
5.7.5 NAS Device
The DVR can connect Network Attached Storage (NAS) devices to expand
the size of the database. Before connecting the NAS device, the DVR has to
be shut down. After the NAS device is connected and the DVR is rebooted,
access <Database Setup> Æ <NAS Devices> and the menu will be displayed
as below. The items <Active> and <Action> is the same as in Internal /
External Disks menu.
NAS Devices
Device Name
xxxxxxxxxxx
Active
Yes
Detail
Yes
Action
None
Detail
Set this item to <Yes> and the detailed information of the NAS device will be
shown on the monitor. Refer to the following for an example. The information
is “read only”.
NAS Detailed Info
Device Name: xxxxxxxxxxx
IP: 192.168.50.2
Port: 8080
Netmask: 255.255.255.0
Storage Status
Index Status Free Size Total Size
5.8 Configuration
The Configuration menu can be used to restore the default factory settings,
import and export configurations. Select <Configuration> from the Main menu
and press ENTER. The following menu is displayed. Items in this menu are
described in the following subsections.
Configuration
Load Factory Default
Import Config
Export Config
Import Deterrent
Export Deterrent
Boot Log
Operation Log
No
On