Filter
Top Products
English - 73
SPECIAL FEATURES
Customizing Your Remote Control
Your TV comes equipped with a universal remote control. In addition to controlling the TV, the
universal remote control can also operate a VCR, Cable box, DVD, and some Samsung set-top
boxes (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).
1
Turn off your VCR (Cable box or DVD player).
2
Press the MODE button to switch the remote control to the VCR (CABLE or
DVD) mode.
œ The remote control has five
modes:
TV, STB, VCR,
CABLE, and DVD.
3
On your Samsung remote control, press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page
for your brand of VCR (Cable box or DVD player).
œ Make sure you enter 3 digits of
the code, even if the first digit
is a “0”. (If more than one code
is listed, try the first one.)
5
Press the POWER button on the remote control. Your VCR (Cable box or
DVD player) should turn on. If your VCR (Cable box or DVD player) turns on,
your remote control is now set correctly.
œ If your VCR (Cable box or
DVD player) does not turn on,
repeat steps 2, 3, and 4, but try
one of the other codes listed
for the brand of your particular
VCR (Cable box or DVD
player).
6
Once your remote control is set up, press the MODE button any time you
want to use the remote to operate your VCR (Cable box or DVD player).
• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,
PLAY/PAUSE and FF) will still operate your VCR (or DVD player).
• When your remote control is in the
STB, VCR, CABLE or DVD mode, the volume buttons still control
your TV’s volume.
Setting Up Your Remote Control to Operate Your VCR (Cable box or
DVD player)
of
BP68-00545AEng 10/18/05 5:54 PM Page 73