Filter
Top Products
English - 16
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the
(Power) button on the front panel.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently:
1 Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set.
is displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is automatically
displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.
➢
The default selection is Home.
➢
We recommend setting the TV to Home mode for the best picture in your home
environment.
➢
Shop mode is only intended for use in retail environments.
➢
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home)
mode, press the Volume button and then hold down the MENU button for five seconds
on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
➢
If the antenna is connected to ANT 1 IN(CABLE), select Cable and if it is connected to
ANT 2 IN(AIR), select Air.
➢
If both ANT 1 IN(CABLE) and ANT 2 IN(AIR) are connected, select the Air + Cable.
➢
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by
pressing the ◄ button, then press the ▲ or ▼ button.
Press the ► button to select Start, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
5 The TV will begin memorizing all of the available channels. After all the available channels
are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete. Clock Mode menu is
automatically displayed.
➢
To stop the search before it has finished, press the ENTER button with stop selected.
6 Press the ENTER button.
Press the ▲ or ▼ button to select Manual for setting the current time manually, then press
the ENTER button. The message Enter the current date and time. is displayed.
➢
If you select Auto, Set to daylight saving time. is displayed, then go to step 9.
(If you want to set the time automatically, skip to step 9.)
7 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or am/pm.
Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER
button.
➢
You can set the Month, Day, Year, Hour, and Minute directly by pressing the number
buttons on the remote control.
8 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
➢
Even if the ENTER button is not pressed, the message will automatically disappear after
several seconds.
Continued...
Plug & Play
Auto Program in Progress.
15%
Air 16
Enter
Stop
Menu language, Shop Mode,
Channels and Time will be set.
Start
Plug & Play
Enter the current date and time.
Month Day Year
--
----
Hour Minute am/pm
--
-- --
--
Adjust
Enter
Skip
Move
Enjoy your watching.
OK
Plug & Play
Select the antennas to memorize.
Air
Cable
Air + Cable
Start
Start
Start
Move
Enter
Skip
Plug & Play
Select the language of the OSD.
Language
English
Español
Français
Move
Enter Skip
Plug & Play
Plug & Play
Select Home Mode when installing this TV at
home.
Shop Home
Move
Enter
Skip
Plug & Play
Plug & Play
Set the Clock Mode.
Clock Mode
Move
Enter
Skip
Auto
Manual
Plug & Play
Enter
Skip
Move
Selects a cable signal type for your
location.
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Skip
BP68-00626E_Eng-1.indd 16 2007-04-13 ｿﾀﾈﾄ 2:06:40