English - 10
Wall Installation Instructions
Wall Mount Bracket
List of Contents (Sold Separately)
Plastic Screw
Anchors
Screws
Installation Notes
◆
The wall attachment panel is sold separately.
◆
Do not install the product in any location other than a vertical wall.
◆
To protect the performance of your product and prevent problems, avoid the following locations:
-
Any place vulnerable to vibration or impact: The product may come off and break.
-
Near smoke and fire detectors: The sprinkler may be activated upon detecting heat from the product.
-
Near high voltage: The reception for your product may be interrupted.
-
Near heat sources: The product may get overheated.
How to Adjust Mounting Angle
1 Attach the TV to the wall bracket.
(Follow the instructions below.)
2 Pull the upper part of the TV (which has been
attached to the bracket) forward in the
direction of the arrow and adjust the angle.
3 You can adjust the angle to your liking
between 0-15˚. (±2˚)
The wall mount bracket is delivered
separately. Please tighten the captive
screw in the direction of the arrow after
assembling the bracket.
Captive screw
BN68-00746A(GAIA2_Euro_ENG) 2004/08/23 03:54 PM Page 10