Filter
Top Products
English - 16
When the television is initially powered on several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result
: The message Plug & Play is displayed.
2 To start Plug & Play, press the ENTER () button.
Result
: The Language menu is displayed.
3 Select the appropriate language by pressing the ▲ or ▼ button.
Press the
ENTER () button to confirm your choice.
Result
: The message Check antenna input. is displayed.
4 Make sure that the antenna is connected to the TV, then press the
ENTER () button.
Result
: The Country menu is displayed.
5 Select your country by pressing the ▲ or ▼ button. Press the
ENTER () button to confirm your choice.
Result
: The Auto Store menu is displayed.
6 To start channel store, press the ENTER () button.
Result
: The search will end automatically. Channels are sorted
and stored in the order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the
Clock Set menu is
displayed.
➢
To stop the search before it has finished or return to normal
viewing, press the
MENU () button.
7 Press the œ or √ button to move to the Hour or Minute.
Set these by pressing the
▲ or ▼ button.
➢
You can also set the Hour and Minute by pressing the
number buttons directly.
8 Press the ENTER () button.
9 When the setting has all finished, the message Enjoy your
viewing
is displayed, then the channel which has been stored will
be activated.
Plug & Play Feature
Language
English
Deutsch
Français
Nederlands
††
Plug & Play
Move
Enter Skip
Country
▲
United Kingdom
Eastern Europe
Others
Plug & Play
Move
Enter Skip
Plug & Play
Check antenna input.
Plug & Play
Enter Skip
OK
Auto Store
Enter Skip
Start
P 1 C 2 76MHz
0%
Clock Set
œœ √√
Move Adjust Skip
TV
Hour Minute
00 00
Enjoy your viewing
BN68-00746A(GAIA2_Euro_ENG) 2004/08/23 03:55 PM Page 16