Filter
Top Products
English - 52
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box, and the TV
source (broadcast or cable).
1 Press the MENU () button.
Result
: The options available in the Input group are
displayed.
2 Press the ENTER () button.
Result
: Source List is selected.
3 Press the ENTER () button again.
4 Press the ▲ or ▼ button to select the signal source, then press
the
ENTER () button.
➢
◆
When you connect a piece of equipment to the TV, you
can choose between the following sets of jacks :
Ext.1,
Ext.2, Ext.3, Component, HDMI, DVI, or PC on the TV’s
rear panel, and
AV or S-Video on the TV’s side panel.
◆
You can select these options simply by pressing the
SOURCE () button. If you change the external source
while viewing, it might take a short period of time for
pictures to be switched.
5 Press the MENU () button.
Result
: The options available in the Input group are
displayed again.
6 Press the ▲ or ▼ button to select Edit Name. Press the ENTER
() button.
7 Press the ▲ or ▼ button to select the external source to be edited.
Press the
ENTER () button.
Result
:
The available device names are listed
.
VCR
-
DVD
-
Cable STB
-
HD STB
-
Satellite STB
-
AV Receiver
-
DVD Receiver
-
Game
-
Camcorder - DVD Combo - DHR (DVD HDD
Recorder) - PC.
8 Select the required device by pressing the ▲ or ▼ button.
9 Press the ENTER () button to confirm your choice.
Input
Move Enter Return
Source List :TV
√√
Edit Name
√√
TV
Input
Move Enter Return
Source List :TV
√√
Edit Name
√√
TV
Source List
Move Enter Return
TV
Ext.1 :
----
Ext.2 :
----
Ext.3 :
----
AV :
----
S-Video :
----
Component :
----
▼ More
TV
Edit Name
Move Enter Return
Ext.1 :
----
√√√√
Ext.2 :
----
√√√√
Ext.3 :
----
√√√√
AV :
----
√√√√
S-Video :
----
√√√√
Component :
----
√√√√
HDMI :
----
√√√√
▼ More
TV
----
VCR
DVD
Cable STB
HD STB
Satellite STB
AV Receiver
†
BN68-00746A(GAIA2_Euro_ENG) 2004/08/23 03:56 PM Page 52