Filter
Top Products
104
Using MDC
3
3 Using MDC
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an
extended period of time.
Time: You can set the timer for Screen Saver.
Off
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals
(Period).
Interval: Display the image retention-preventive pattern set in Mode for a specified period of time
(from Start Time to End Time).
Mode: Select a screen protective pattern to display.
Period(Hour): Specify the time interval to activate the Screen Saver function.
The option is enabled when Repeat is selected for Timer.
Time(Sec): Specify the duration to keep the Screen Saver function on.
The option is enabled when Repeat is selected for Timer.
Start Time: Set start time to display screen saver function.
The option is enabled when Repeat is selected for Timer.
End Time: Set end time to display screen saver function.
The option is enabled when Repeat is selected for Timer.
Period(Hour) and
Time(Sec) can be configured
when Repeat is selected.
Start Time and End Time can
be configured when Interval is
selected.