Samsung PE40C Flat Panel Television User Manual


 
172
System
8
8 System
8.15.3 BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which
support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the
optimal resolution.
Available when you connect Samsung products that support
BD Wise
through an HDMI cable to the
product.
8.15.4 Menu Transparency
Adjust transparency of menu box.
High / Medium / Low
8.15.5 Sound Feedback
Your product gives sound feedback when you use product. Sound Feedback is enabled by default.
Turn off Sound Feedback or adjust its volume.
Off / Low / Medium / High
8.15.6 Auto Power
Enabling this option will automatically power on the product if the power cable is connected.
8.15.7 Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Auto
Power-saving mode will activate if no input signals are detected even though a source device is
connected to the display.
The message "No Signal" will appear if no source device is connected.
On
Power-saving mode will activate if no input signals are detected.
Off
The message "No Signal" will appear if no input signals are detected.
The Standby Control option is only enabled when Source is set to PC, DVI, HDMI or
DisplayPort.
If "No Signal" is displayed although a source device is connected, check the cable
connection. Refer to 185 page for details about connecting source devices.