Filter
Top Products
130
Screen Adjustment
4
4 Screen Adjustment
4.8.1 Color Tone
If the input source is PC, DVI, DisplayPort or HDMI (PC connection).
Off / Cool / Standard / Warm
If the input source is AV, Component, HDMI or TV
Off / Cool / Standard / Warm1 / Warm2
Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.
Settings can be adjusted and stored for each external device connected to an input on the
product.
4.8.2 Color Temp.
Adjust the color temperature (Red/Green/Blue). (Range: 3000K–15000K)
This option is available when Color Tone is set to Off.
4.8.3 Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on the screen.
Off / Low / Medium / High / Auto / Auto Visualization
Auto Visualization: When changing analog channels, displays signal strength.
Only available for analog channels.
When bar is green, is that the best possible signal.
When the signal is weak, try all the options until the the product displays the best picture.
4.8.4 MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
Off / Low / Medium / High / Auto
HDMI Dynamic, Standard,
Natural, Movie
Color Tone / Color Temp. / Digital Noise Filter / MPEG
Noise Filter / HDMI Black Level
AV
,
Component
,
TV
,
HDMI
(1080i)
Dynamic, Standard,
Natural, Movie
Color Tone / Color Temp. / Digital Noise Filter / MPEG
Noise Filter / Film Mode
Input source Picture Mode Picture Options