Filter
Top Products
Tu rning the PDP On and Off
36
Turning the PDP On and Off
Press the POWER button on the remote control.
The PDP will be turned on and you will be able to use its
features. You can also use the POWER ( ) button on the
front of the PDP.
Note
• If your PDP isn’t turned on when the POWER button is
pressed: Press the
MODE
button to check if the TV mode
has been chosen ( ).
Plug & Play Feature
When the PDP is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking the antenna input, memorizing the channels, and setting the time.
Note
• The Plug & Play function operates after plugging in the PDP for the first time.
1
Press the POWER button on the remote control.
The message “Menu language, channels and time
will be set.” is displayed.
Press the ENTER button, then “Select the language of
OSD” menu is automatically displayed.
2
Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then the
ENTER button. “Select the antennas to memorize.”
menu is automatically displayed.
Menu language, Channels
and Time will be set.
i
Start
Select the language of the OSD.
Menu Language : English
Plug & Play
Enter Skip
English
Spanish
French
Move