Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the MENU button. Press the ▲ or ▼ button to
select “Picture”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “PIP”, then press
the ENTER button.
3
Press the ▲ or ▼ button to select “Source”, then
press the ENTER button.
4
Press the ▲ or ▼ button to cycle through all of the
available signal sources:
“TV”, “AV1”, “AV2”, “S-Video1”, or “S-Video2”.
The signal from these inputs will not appear if you
have not connected any equipment to the PDP's
respective input jacks.
5
Press the MENU button to exit.
Notes
• The same Source can not be selected on both the main screen and subscreen.
• TV(DTV), COMPONENT, DVI, HDMI are not available in PIP picture.
60
Mode : Dynamic √
Custom √
Color Tone : Normal √
Size √
DNIe : On √
My Color Control √
† More
PictureTV
Move Enter Return
PIP : On √
Source : TV √
Swap
Size :
√
Position : √
PIP Channel : CABLE 3 √
PIPTV
Move Enter Return
PIP : On
Source : TV
Swap
Size :
Position :
PIP Channel : CABLE 3
PIPTV
Move Enter Return
TV
AV1
AV2
S-Video1
S-Video2