Samsung HP-P5581 Flat Panel Television User Manual


 
9
Rear Panel
Side of the TV
ŒPOWER IN
Connect the supplied power cord.
´SERVICE
Connector for service only.
ˇHDMI IN
Connect to the HDMI jack of a device with
HDMI output.
¨DVI IN (DVI / R-AUDIO-L)
Connect to the digital video and audio
output jack of a device with DVI output.
ˆAV IN/OUT (R-AUDIO-L)
Audio outputs for external device.
ØVIDEO
Video inputs for external devices, such as
a camcorder or VCR.
R-AUDIO-L
Audio inputs for external devices, such as
a camcorder or VCR.
COMPONENT IN
Video (Y/PB/PR) and audio (L-AUDIO-R)
inputs for component.
S-VIDEO
Video inputs for external devices with an
S-Video output, such as a camcorder or VCR.
˝cableCARD
Insert the cableCARD into the slot.
ÔOPTICAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
COAXIAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
ÒSUB-WOOFER OUT
Connect to an active SUB-WOOFER.
ÚEXT SPEAKER (8)
Connectors for external rear speakers.
ÆANT (75)
75 Coaxial connector for Antenna/Cable
Network.
Note
The HDMI IN, DVI IN jack is not compatible
with PC.
Audio Input (L, R)
Video Input
S-Video Input
Ferrite Cores
The ferrite cores are used to
attenuate undesired signals. When
connecting cables, attach one of
these ferrite cores to the cable near
the connector.
When you connect Side AV cable,
Digital Audio out(Coaxial), sub
woofer cable, and Speaker cables,
first bind the ferrite core around
each cables to secure it.