Filter
Top Products
14
YOUR NEW DIGITAL TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continu-
ously, such as a VCR or a DVD player.
Your TV has several input jacks, so you can connect different A/V components simulta-
neously (i.e., a VCR and a DVD, 2 VCRs, etc.).
For more information on connecting equipment, see page 27.
Œ
AUDIO-VIDEO MONITOR
OUTPUT jacks
Connect to the audio/video input jacks of a
recording VCR.
´
VIDEO INPUT jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices (Two sets are avail-
able: Video2 and Video3).
ˇ
AUDIO INPUT jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
¨
DVI (Digital Visual Interface)
AUDIO INPUT jacks (AUDIO
INPUT 2)
Receives the digital audio signals from AV
devices.
ˆ
S-VIDEO2 INPUT jack
Connect to S-VIDEO output jacks of an S-VHS
VCR or DVD player.
Ø
COMPONENT 1, 2 (480i,
480p, 720p, 1080i)
AUDIO/VIDEO INPUT jacks
Connect a source that outputs
480i/480p/720p/1080i Y,P
B
and P
R
signals, such as
a DVD or DTV Set-Top Box.
∏
SERVICE PORT
For service only.
”
DIGITAL INPUT (Digital
Visual Interface) jack
Receives the digital signals from a Set-top Box.
’
OPTICAL OUTPUT jack
Connect to a Digital Audio component.
˝
ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use ANT A and
ANT B terminals to receive a signal from
VHF/UHF antennas or your cable system.