Filter
Top Products
32
OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air”
(antenna) and cable channels. After the available channels are memorized, use the
CH and CH buttons to scan through the channels. This eliminates the need
to change channels by entering the channel digits. There are three steps for memo-
rizing channels: selecting a broadcast source, memorizing the channels (automatic)
and adding/deleting channels (manual).
Selecting the Video Signal-source
Before your TV can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button.
Press the † button to
select “Channel”, then
press the ENTER button.
2
Press the ENTER button
twice to select “Select
Antenna”.
Press the † button to
select “Air” or “Cable”,
then press the ENTER
button.
3
Press the † button to
select “Memorize
Channels”, then press the
ENTER button.
Select Antenna : Air √
Select Favorite Channels √
Memorize Channels √
Add & Delete Channels √
Fine Tune Channels √
Check Signal Strenght √
Channel Labeling √
T V Channel
Select Antenna : Air √
Select Favorite Channels √
Memorize Channels √
Add & Delete Channels √
Fine Tune Channels √
Check Signal Strenght √
Channel Labeling √
T V Channel
Select Antenna : Air √
Select Favorite Channels √
Memorize Channels √
Add & Delete Channels √
Fine Tune Channels √
Check Signal Strenght √
Channel Labeling √
T V Channel
Air
Cable