Filter
Top Products
76
▼
4
Enter 3 digits of the cable box code listed below for your brand of
cable box.
Make sure you enter 3 digits of
the code, even if the first digit is a
“0.” (If more than one code is listed,
try the first one.)
▼
5
Press the POWER button. Your cable box should turn on. If your
cable box turns on, your remote control is now “set up” correctly.
If your cable box does not turn
on, repeat steps 2, 3, and 4, but try
one of the other codes listed for your
particular brand of cable box. (If no
other codes are listed, try each cable
box code, 000 through 077.)
▼
6
Once your remote control is set up, press the MODE button any time
you want to use the remote to operate your cable box.
When your remote control is in
the “CABLE” mode, the volume but-
tons still control your TV’s volume.
Also, the VCR control buttons (PLAY,
PAUSE, etc.) will still operate your
VCR.
3
Press the SET button on your TV's remote control.
▼
2
Press the MODE button to select CATV. (CATV mode is displayed on
LED screen).
The remote control has five
“modes”: “TV,” “STB,” “VCR”,
“CABLE”, “DVD.”
Press the MODE button to switch
the remote control to the “CABLE”
mode.
1
Turn off your cable
box.
Setting Up Your Remote Control to Operate Your Cable Box
SPECIAL FEATURES