Samsung TSN3084WHD CRT Television User Manual


 
25
INSTALLATION
Connecting to DVI (Digital Visual Interface)
By inputting a high-bandwidth Digital Content Protection high-definition picture source to the
DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the screen in
their digital forms. (This DIGITAL INPUT jack is for use in the future when High-bandwidth
Digital Content Protection DTV decoders, DVD players and D-VHS are put on the market.)
Notes
The DIGITAL INPUT jack can only be used with 1080i, 720p and 480p picture signals.
Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080i, 720p or 480p.
For detailed information, refer to the Set Top Box instruction manual.
The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.
Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV decoder.
1
Connect a coaxial cable to the ANTEN-
NA IN terminal on the Set-Top Box and
the antenna terminal on the TV.
2
Connect a set of audio cables between
the AUDIO INPUT 2 jacks on the TV and
the AUDIO OUT jacks on the Set Top
Box.
3
Connect a DVI cable between the DIGI-
TAL INPUT jack on the TV and the DVI
OUT jack on the Set Top Box.