Filter
Top Products
User’s Manual
32
4.2.2 RAID1
During the RAID1 mode, when a SATA hard drive fails, replace it and then rebuild the RAID
array.
- During the RAID1 mode, when a SATA hard drive fails, the SVS-5R activates a beeping
sound, as well as the RAID error LED. To disable the beeping sound, open the front panel
using the access panel lock, and then press the front mute switch. The front LCD will display
the SVS-5R status as Degraded. d:FOXX; indicating a failed SATA hard drive.
- When a failed SATA hard drive is replaced with a new one, the LCD displays the following
message. Press the left button to start rebuilding the RAID array.
- During the rebuilding process, the front LCD displays the following message. This indicates a
rebuilding SATA hard drive and the remaining time.
- When the RAID array is successfully rebuilt, the front LCD displays the following message.
SVS-5R R1 2d
d:OOXX
Rebuild d:ROXX
1h:31m
RAID rebuilding?
<-Okay?
Degraded R1 2d
d:FOXX
Caution※ : RAID0 is not recommended for saving crucial data.