Samsung SCC-3000 DVR User Manual


  Open as PDF
of 39
 
《21》
PTZ Mode
(6) MODEL
■ This menu is for setting the PTZ camera ID and camera type.
① At the [PTZ SETUP 1▶] menu, press the ▶▶ button (see p.15).
② Press the 1 button to move to the Model Setup screen.
PTZSETUP2
1:MODEL 2:TRACE
3:AF
PressNumericKey
+,
-
:ModelChange
PTZMODELSETUP
PTZ ID:
0[0]
MODEL:NONE
+,
-
:ModelChange
PTZMODELSETUP
PTZ ID:
1[1]
MODEL:SPD
③ Press a number in the number pad to set the PTZ camera ID.
The camera model type saved in EEPROM is displayed on the LCD monitor when changing camera ID.
When
entering '1'
④ Press the + and - buttons on the number pad to change the camera type. SPD-1600/2200/2500, PELCO-D,
PANASONIC(WV-CS854A) and SAMSUNG ELECTRONICS (SCC-643) types can be selected.
⑤ Press the ENTER button to finish the setup.
 previous next