Samsung SCC-3000 DVR User Manual


  Open as PDF
of 39
 
《27》
Controller Mode
(2) Controller ID Setup
■ This menu is for setting controller ID.
① At the [Controller SETUP 1 ▶] menu, press the 1 button (see p.26).
② Press a number on the number pad to enter a controller ID.
③ Press the ENTER button to set the controller ID.
▤ Assign number 1 for setting the controller ID for the master controller.
▤ The lower the ID number, the higher the controller priority.
▤ Sub-controllers can be operated only when connected to a master
controller; Sub-controllers cannot be operated independently.
CONTROLLERSETUP1
1:CONTROLLERID
2:SERIAL 3:COPY
PressNumericKey
(3) SERIAL Setup
■ This menu is for setting the serial port for connecting external devices to the controller.
① At the [Controller SETUP 1 ▶] menu, press the 2 button (see p.26).
② Press the 1 button to activate the Serial 1 PORT Setup screen (PTZ
camera/DVR connection PORT). Press the 2 button to activate the
Serial 2 PORT Setup screen (reserved PORT).
▤ The value displayed at step ② indicates the current setup value.
▤ The BAUD RATE/ DATA BIT/ STOP BIT/ PARATY BIT for PORT
2, which connects to the sub-controller, are fixed and cannot be
changed.
③ The PORT Setup screen will be displayed.
Press the number for a setup menu.
1: Sets the BAUD RATE. (4800, 9600, 19200, 38400)
2: Sets the DATA BIT. (8BIT, 7BIT)
3: Sets the STOP BIT. (1BIT, 2BIT)
4: Sets the PARITY BIT. (NONE, ODD, EVEN)
▤ Default values for controller SERIAL are 9600 (BAUD RATE), 8BIT
(DATA BIT), 1BIT (STOP BIT) and NONE (PARITY BIT).
CONTROLLERSETUP1
1:CONTROLLERID
2:SERIAL 3:COPY
PressNumericKey
RS
-
422/485SET
1:S19600,8,1,NONE
2:S39600,8,1,NONE
PressNumericKey
RS
-
422/485SET
1:BUAD
3:STOPBIT
2:DATA
4:PARITY
PressNumericKey
Enter:IDSet<1
-
16>
CONTROLLERIDSET
CONTROLLER
ID:1[0]
ID1ISMASTERID!
 previous next