Filter
Top Products
46
Reconnecting the Smart Touch Control
If the Smart Touch Control stops operating or works abnormally, replace the battery as this may
be caused by insufficient battery power. If the problem persists, press the PAIRING button on the
Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be accessed without
removing the Smart Touch Control's battery cover. Within a distance between 1ft to 13.1ft(30cm to
4m), point the Smart Touch Control to the TV receiver and press the PAIRING button. When pairing is
complete, the pairing image displays at the bottom left of the TV screen.
<The Smart Touch Control's pairing button>
Battery Low Alarm
If the battery becomes low while using the Smart Touch Control, the following alarm window blinks
and appears at the bottom of the left screen. If the alarm window pops up, replace the batteries of the
Smart Touch Control. Use alkaline batteries for longer usage.
<Low battery alarm window>