Samsung UN55F9000AF Flat Panel Television User Manual


 
100
Color Tone: Adjusts the color tone. The setting is applied on an individual Picture Mode basis.
When Picture Mode is changed, the corresponding setting will apply automatically. If Picture
Mode is set to Dynamic, users can only choose between Cool and Standard.
Try Now
Digital Clean View: Reduces static and ghosting caused by weak signals. This feature is only
available for ATV channels. Selecting Auto Visualization displays the signal strength on the
screen. Green indicates the best possible signal.
Try Now
MPEG Noise Filter: Reduces MPEG noise and improves the video quality.
Try Now
HDMI Black Level: This is available only for video input via an HDMI cable. Use this to reduce
image retention that may occur when watching video from an external device. Choose one of the
black levels.
Try Now
Film Mode: Optimizes the picture quality for movies. Select the mode for watching movies. This
feature is only available when watching TV or when the input signal is AV, Component (480i,
1080i), or HDMI (1080i).
Try Now
Auto Motion Plus: Removes blurring and shudders from scenes with rapid movement. Select
Custom to adjust the Blur Reduction and Judder Reduction levels manually. Select Demo to split
the screen into two and verify the effects of Auto Motion Plus.
Try Now
"
While Auto Motion Plus is in effect, select the 정보표시 button on the virtual remote panel to display
the resolution and frequency of the incoming video signal (60Hz). The displayed frequency is not the
same as the frequency of the picture the TV is displaying when Auto Motion Plus is activated.
Cinema Black: In Movie mode, this feature dims the top and bottom areas of the video image
to provide a more immersive viewing experience. This function is available for LED 7400, 7500,
8000, 8200, 8500 series models only.
Smart LED: This controls the brightness of individual areas on screen to maximum contrast
automatically. This function is not supported depending on the model.