Filter
Top Products
142
Anynet+ (HDMI-CEC)
This SMART TV is enabled with Anynet+ (HDMI-CEC), a feature that makes it possible to control
Samsung external devices connected to the TV with ease. With Anynet+ (HDMI-CEC), you can use the
TV remote control to operate all compatible Samsung devices that are connected to the TV. However,
Anynet+ (HDMI-CEC) only works with the remote control and not with the panel keys.
"
Use the TV's remote control to operate third-party cable boxes, Blu-ray players, and home theaters
connected to the TV. For more information, refer to "Universal Remote Control Setup".
Precautions
●
This feature does not support other manufacturer's products.
●
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not
support Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
●
The TV remote control may not function under certain circumstances. In this case, select the
Anynet+ device again.
●
Anynet+ (HDMI-CEC) only works with external devices that support Anynet+ (HDMI-CEC) and
only when those devices are either in standby mode or turned on.
●
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type).
With home theater systems, however, the number of systems that can be controlled is limited to
one.
●
A home theater system that has been connected to the TV using an HDMI cable and an optical
cable supports 2-channel audio only. However, the home theater is capable of supporting
5.1-channel audio from digital broadcasts.
●
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI
cable and the device's digital audio output connector directly to the home theater system.
Anynet+ (HDMI-CEC) Setup
가상리모컨
¤
> Menu
m
> System > Anynet+ (HDMI-CEC)
Try Now
Enable/disable Anynet+ (HDMI-CEC).
●
Anynet+ (HDMI-CEC): Enables/disables Anynet+ (HDMI-CEC). Disabling this turns off all
Anynet+-related features.
Try Now
●
Auto Turn Off: Turns off external devices when the TV is turned off. Some devices do not support
this option.
Try Now